How To Set Up A Ubiquiti Access Point

Basic Instruction for setting upwards a Ubiquiti Unifi AP

Package includes –
one.Unifi AP/LR Radio (White dome)
2.   Ability Over Ethernet unit (Black rectangular unit)
3.   Ability Cord
iv.   Mounting bracket for ceiling mount of AP/LR
5.   Quick Starting time Guide

Additional Hardware Required
•   2 x SFTP Ethernet Cables of advisable length
•   1 x metre and 1 x 5 metre would be recommended
•   If not purchased with the UniFi unit we recommend Cat 6 ethernet cablevision with double shielding plus earth bleed wire

Hardware Setup

•   The UniFi unit needs to be connected to your existing ADSL or similar router via the Power Over Ethernet device
•   Unit may exist ceiling mounted or depending on the location can work as efficiently but hung on the wall via a claw
•   The Power Over Ethernet unit of measurement has two Ethernet ports labelled as POE and Ethernet and one power port
•   Plug one of the Ethernet Cables into each of the two Ethernet ports
•   The other end of the cable from the POE port then needs to be plugged into the Unifi AP/LR
•   The other end of the cable from the Ethernet port needs to exist plugged into the ADSL Router (preferably port one)
•   Now attach the power cable to the POE and plug information technology into a ability outlet
•   The Unifi unit will later on a brusk delay display a blue lite and begin establishing a connection with your network. At which time it should plough light-green
•   After a couple of minutes it should exist available to any wireless device

This should be plenty to go you upwards and running. In order to manage the unit and make any changes you may require you will need to run the Unifi Controller software on a PC. It tin be downloaded from https://www.ubnt.com/download/unifi and selecting UniFi v5.0.7 Controller for Windows.

In one case you have installed the Controller Software you need to launch the UniFi Controller. To launch the UniFi Configuration and Management interface you must first run beginning the UniFi Controller.

Click on Launch a Browser button and your default Internet Browser volition open the management portal beneath.

The moving-picture show is a little unclear but you should meet in the WLAN circle "Awaiting 1".

Click on this circle and information technology will open up up to display.

Basic_Instructions_3

Now Click on Prefer and the status should alter from "awaiting approval" to "adopting".

Y'all can either wait for the screen to update or click on the "refresh now" button.

Status will now show "Connected".

NB. If for any reason the reason the device does not show up please check that is I connected properly to your network and cycle the power to exist certain. You lot can then use the table provided here - https://help.ubnt.com/hc/en-us/manufactures/204910134-UniFi-What-do-the-LED-Color-Patterns-Represent-for-UniFi-Devices - to troubleshoot the effect.

Once Adopted please click on the device in the above screen and it volition open up a configuration pane on the right of the screen.

In that location are a few basic options I volition explain here, for any farther particular please consult the Ubiquiti Controller Guide available here - https://www.ubnt.com/download/unifi/unifi-ap-air conditioning-lr or the Ubiquiti Support Knowledgebase which provides answers to question and some first-class tutorials available here - https://help.ubnt.com/hc/en-us
Giving your Radio a Name for WiFi devices and enable security.
1.   Click on Configuration
2.   Click on WLANS
3.   Under WLAN 2G Click on the pencil symbol adjacent to test
iv.   Uncheck enabled on this AP to disable information technology
five.   Click on Salvage
six.   Under WLAN 2G Click on the pencil symbol next to Name
7.   In the SSID type a proper name. This is how your phone,tablet,laptop and other devices will run across the network
8.   Click on Security Cardinal and blazon a phrase or number sequence or combination every bit your password
9.   Click on Save
10. This is the password you need to enter when you connect with your WiFi device

Connectivity
•   Either on a laptop/tablet or phone enable Wireless mode and bring upward a list of available Wifi nodes
•   You should run across one with the name you lot created in seven.
•   Select this and Connect to it. You will and then be prompted for a password. Use the one you created in 8.

See UAP Products