How To Set Shutter Speed On Canon Powershot Sx50 Hs

Setting the Aperture and Shutter Speed (PowerShot SX520 HS)

ID : 8202128300 _ EN _ 2

Solution

In [ ] style, you can Prepare your preferred shutter speed before shooting. The camera automatically adjusts the aperture value to arrange your shutter speed. In [ ] mode, yous can set your preferred aperture value before shooting. In this case the photographic camera automatically adjusts the shutter speed to arrange your aperture value. In [ ] manner, you can set your preferred shutter speed and aperture value to obtain the desired exposure.

Blurred motion (Tedious shutter speed)

Frozen action (Fast shutter speed)

Blurred groundwork (With a low aperture f/number)

Sharp foreground and groundwork (With a loftier aperture f/number)

Setting the Shutter Speed ([Tv] Mode)

ane. Printing the <Power> button to turn the camera on.

2. Set the style dial to [ ].

3. Turn the <> dial to ready the shutter speed.

IMPORTANT

In conditions requiring slower shutter speeds, at that place may exist a delay before you can shoot again, every bit the photographic camera processes images to reduce noise.

When shooting at low shutter speeds on a tripod, yous should set [IS Mode] to [Off].

With shutter speeds of 1.3 seconds or slower, ISO speed is [ ] and cannot be changed.

Orange brandish of aperture values when you press the shutter push halfway indicates that the settings deviate from standard exposure. Adjust the shutter speed until the aperture value is displayed in white, or use rubber shift

NOTE

Setting the Discontinuity Value ([Av] Mode)

one. Press the <Power> push button to plow the photographic camera on.

2. Ready the style dial to [ ].

iii. Turn the <> dial to set the aperture value.

Important

Orange display of shutter speeds when you press the shutter button halfway indicates that the settings deviate from standard exposure. Adjust the discontinuity value until the shutter speed is displayed in white, or use safety shift.

Annotation

Setting the Shutter Speed and Aperture Value ([Yard] Mode)

ane. Press the <Power> push button to plow the camera on.

two. Set the manner dial to [ ].

3. Printing the <> button, cull adjustment of shutter speed or aperture value, and plough the <> dial to specify a value.

An exposure level mark based on your specified value is shown on the exposure level indicator for comparison to the standard exposure level.
The exposure level marking is shown in orange when the difference from standard exposure exceeds two stops. [two] or [+2] is displayed in orange in the lower right when you press the shutter button halfway.